BOD Incubator in chennai
B O D –Triple walled vertical type cabinet. Outer casing is mild steel attractively colour powder coating finished. 75mm thickness glasswool/puf insulation minimize temperature loss. Stainless steel/Aluminium interior walls supports allowing wide range of shelf positions and spacings. Intermediate wall maintains constant temperature inside the chamber. Full view inner glass door closed on a resilient gasket and permits inspection of stores without disturbing the same.
|Height(mm)||Width (mm)||Depth (mm)||Volume (cu.ft)||Litres||Rating|
|845||400||300||4 Nos||105||400 W|
|845||500||400||6 Nos||165||500 W|
|870||570||560||10 Nos||280||1000 W|
|900||650||580||12 Nos||325||1500 W|
|900||750||750||18 Nos||504||2000 W|
|900||900||900||27 Nos||756||4000 W|
Lock and key arrangements is provided in the double walled outer door, also fitted a door operated lamp for illumination inside the chamber. The unit is mounted on caster wheels for ease of mobility.
BOD incubator-Control Panel
All controls and circuits are housed at the top side of the B.O.D. Incubator and therefore protected from spillage. Separate indicator lamps for mains, cooling and heating indication. Temperature setting screw allow the user to select and set any desired temperature. Voltmeter, Ammeter is provided on the panel to read the incoming voltage and amps. Power supply working on 230 volt single phase 50Hz A/c main.
BOD INCUBATOR Manufacturer in CHENNAI-Optional Accessories
Optional For Above Models:
- Voltage stabliser is recommended to use.
- Attachement for Converting B O D Incubator to Environmental Study Chamber
A. Humidity Control and Humidification System.
B. Lighting system by three fluorescent tubes of 20 watts with back wall.
C. Digital Timer, 0-999 hr. or 0-999 minutes.
D. Slow Speed Shaking Platform
E. Voltage Stabiliser.