ENVIRONMENTAL CHAMBER MANUFACTURER
An environmental chamber manufacturer is a company that specializes in designing and producing environmental chambers. These chambers are specialized enclosures used to test and simulate various environmental conditions such as temperature, humidity, pressure, and lighting. They are commonly used in industries such as aerospace, automotive, electronics, and pharmaceuticals to test the performance and durability of products under varying conditions. The manufacturer typically offers a range of chamber sizes and configurations to meet the specific needs of their customers. They may also provide installation, maintenance, and repair services for their chambers.
Environmental chamber manufacturer in chennai
WE ARE ONE OF THE Environmental chamber manufacturer in chennai
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Hot Air Oven, Vacuum Oven, Incubator, BOD Incubator, CO2 Incubator, Orbital Shaking Incubator, Hot Plate, Heating Mantle, Soxhlet Apparatus, Water Bath, Centrifuge, Electronic Weighing Balance, Laboratory Mixers/Shakers, Autoclave, Distillation Unit, Electric Bunsen Burner, Fume Hood, Bio Safety Cabinets/ Laminar Air Flow, Refrigerators and Air Conditioners.
| Specification | SWN-40T | SWN-70T |
|---|---|---|
| Temperature Range | – 35°C to +180°C | – 70°C to +180°C |
| Standard Volume Range | 110 L, 225L, 270L, 450L, 580L, 1000L, 1500L | 110 L, 225L, 580L, 1000L, 1500L |
| Minimum Temperature | -40°C | -70°C |
| Maximum Temperature | 180°C | 180°C |
| Rate of Temperature Change(options) | 1 °C/Min to 3°C/Min, Upto 20°C/Min | 1 °C/Min to 3°C/Min, Upto 20°C/Min |
| Humidity Range | 10%RH to 98%RH | 10%RH to 98%RH |
| Customisability | Yes | Yes |
| Refrigeration System | Single | Cascade |
| Low GWP Refrigerant (option) | Yes | Yes |
| Test Standard Compliance | IEC-60068, ISO16750, ASTM, SAE, BIS & 50 other standards |
Test Chamber
Testing chambers:
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Freeze thaw Chamber
Hot and Cold Chamber
Thermal Cycling Chamber
Humidity Chamber
Walk In chamber
Machineries
Humidifier / Dehumidifier
Industrial refrigerator
Customized Control panel and its accessories
Industrial chiller / Panel cooler
Industrial furnaces
Thermal Shock Chambers
Boiler system
Calibration bath
Circulating chiller
ENVIRONMENTAL CHAMBER MANUFACTURER
We own a rich experience in manufacturing, trading, supplying and dealing equipment and its spares to our customers. These products are thoroughly checked for quality.
Test chamber & Lab instrument
ENDURANCE TESTING CHAMBERS-Environmental chamber
Testing equipment’s
Climatic Test Chambers
Salt Spray test Chambers
Environmental Simulation
Environmental chamber manufacturer in chennai
Whats app up us through this link:https://wa.link/zqxvlf
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Testing chambers:
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Laboratory Instruments:
Hot Air Oven, Vacuum Oven, Incubator, BOD Incubator, CO2 Incubator, Orbital Shaking Incubator, Hot Plate, Heating Mantle, Soxhlet Apparatus, Water Bath, Centrifuge, Electronic Weighing Balance, Laboratory Mixers/Shakers, Autoclave, Distillation Unit, Electric Bunsen Burner, Fume Hood, Bio Safety Cabinets/ Laminar Air Flow, Refrigerators and Air Conditioners.
.
Blood Bank Instruments:
Donor Couch, Blood Collection Monitor, Tube Sealer, Blood Bank Refrigerator, Deep Freezer, Platelet Agitator/Incubator, Component Centrifuge, Thawing Bath, Cryo Bath, Plasma Expressor, Elisa Reader and Elisa Washer.
.
Research Institute Instruments:
Deep freezers (-20°C, -40°C & -80°C), Ice Maker, Lyophilizer (Freeze dryer), BOD Incubator, CO2 Incubators and Muffle Furnace.
LAB INSTRUMENTS environmental chamber in india
.
***We are under taking Manufacturing/Repair Service/Modification/AMC/CAMC for above instruments &Chamber service in Chennai and Bangalore***
Our Services-Environmental chamber manufacturer in chennai
Steer wing network also offers a variety of preventive maintenance, repair and upgrade plans through our dedicated Service Group. Consisting of experienced technical service and engineering personnel, Our service team is on call for domestic clients for any requirement. Some of the Services Provided Include
- Annual Preventive Maintenance contract Program
- Repairing services
- Manufacturing support
- After sales support
- Calibration service
- Refrigeration retrofits
- Refurbishing of any manufacturer’s unit and/or model
- Control system upgrades for any manufacturer’s
- Spare parts orders
- Installation services or installation supervision
- Equipment/facility start-up
- Equipment operator training
- On call service support 24*7-Environmental chamber manufacturer in chennai
- So you can question us, Trust us, judge us and even partner us in building a truly great support. A journey that
PREVENTIVE MAINTENANCE SOLUTIONS-Environmental chamber manufacturer in chennai
- The nature of service that will be provided in a routine maintenance call is cleaning, general check-up, fine-tuning and minor adjustments required.
- During the AMC period, the below steps will be carried out based on the equipment
REFRIGERATION SYSTEM
- Checking the standing pressure
- Checking of the oil level in compressor.
- Cleaning of condenser coil & condenser cooling fans operation.
- Rectification for any damaged insulation.
- Checking the fitment of all solenoid valves, hand shutoff valves etc.
- Checking of the oil return to the compressor.
- Checking of electrical wiring, timer setting, over load setting.
- Checking of the refrigeration compressor.
- Monitoring of suction & discharge pressure of refrigeration system.-Environmental chamber manufacturer in chennai
- Checking of operation & setting for all safeties such as HP/LP, oil pressure, flow switch etc.
HEATING SYSTEM
- Checking the proper functioning of the relays
- Checking the over temperature safety and alarm
- Monitoring the flowing current of the heaters.
- Functional checking of the entire system
GENERAL WORK
- Overall cleaning of the equipment
- Checking of condenser, fan blades, chamber air circulation fan blade/ impeller compressor Cooling blower, compressor cooling fan blade, tighten the bolts and nuts.
- Checking of door gasket and door seals.
- Checking and adjusting of door hinges and latches, if required.
- Checking of refrigeration compressor.
- Checking of pressure and oil switches and their settings.
- Checking of electrical wiring, timer setting, contactors etc.
- Checking oil level for the compressor.
- Checking the standing pressure, suction &discharges pressure of refrigeration system sand Cross checking of the proper functioning of refrigeration system.
- Checking of complete electrical wiring if any wire found damaged corrections for the same.
- Functional checking of individual system for proper control, safety operation etc.
- Cleaning of all level tanks filters etc., for humidity system if applicable.
- Checking of water level controller operation, cleaning of level sensor, cleaning of scaling on the heater tube for humidity if applicable.
- Filling log sheet and submitting the report of any abnormalities, failures observed and Corrected repairs carried out.
Environmental chamber manufacturer in chennai
WHATS APP UP US THROUGH THIS LINK:HTTPS://WA.LINK/ZQXVLF
Environmental chamber in chennai ,Environmental chamber in bangalore,environmental chamber in andhra,environmental chamber service
Environmental Chamber is humidity and temperature controlled chamber to provide constant temperature and humidity.
steer wing provides temperature and humidity chamber temperature ranges from -60℃ to 150℃ (can be customized). small environmental chamber 80L available; 80L-1000L available. Here for more information about Temperature and Humidity Cabinet.
Mainly the constant temperature and humidity chamber is used as following:
– to condition samples before some test for preparation;
– to provide the required test environment for some test, for example, cold ross flex test – to flex sample in low temperature;
– to test sample change under certain temp and humidity condition as a independent test
Environment Chamber Working Principle
Environmental chamber is mainly composed of temperature system(refrigeration & heating), humidity system, air circulation system, and sensor systems.
-Temperature System
- Refrigeration system: this is a important part of temperature humidity test chamber. Normally, The cooling mode of the test chamber is mechanical refrigeration and auxiliary liquid nitrogen refrigeration. Mechanical refrigeration uses compression refrigeration which consists of Compressor, condenser, throttling mechanism and evaporator. Refrigeration system is divided into single-stage refrigeration and cascade refrigeration.
- Heating system: The heating system of the temp and humidity controlled cabinet is relatively simple compared to the refrigeration system. It is mainly composed of high-power resistance wire. Because the temp and humidity controlled cabinet requires a fast heating rate, the heating system power of the test box is relatively large. The temperature inside the test chamber is filled by the air circulation to fill the inside of the test chamber with the high temperature generated by the resistance wire. The temperature and the balance inside the test chamber are controlled by the sensor and the control system.
-Control system:The control system is the core of the constant climate chamber, which determines the important parameters such as the heating rate and accuracy of the test chamber. The controller of the constant climate chamber adopts PID control, and some control modes using combination of PID and module.
-Humidity system:The humidification method of the climate chamber is steam humidification method, that is, the heated water vapor is directly injected into the test chamber to humidify, and the humidification speed is fast and the humidification control is sensitive. The dehumidification mode of the test box is mechanical refrigeration dehumidification, cooling the air to zero temperature, so that no more than one water vapor in the test chamber is condensed, thus reducing the humidity. This dehumidification process needs to be combined with temperature system, refrigeration system, control system, etc.
-Sensor system:The sensor is mainly a temperature and humidity sensor. The temperature sensor is a platinum (Pt) thermal resistance measurement, and the humidity measurement method is a dry and wet thermometer method.
-Air circulation system:The air circulation system consists of a motor with a centrifugal fan that provides circulation of air in the environmental chamber.
Unuo has wide range environmental chamber for sale. Welcome to contact us for environmental chamber price. Email:[email protected] Whatsapp: +7550192262
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.
Climatic Chambers, Hot and Cold Chamber, Thermal Shock Chamber, Salt Spray Chamber, Humidity chamber, Freeze thaw Chamber,Stability Chamber,Thermal Cycling Chamber,Ageing Chamber,Cold Room, Panel/Water/Oil Coolers.